FUJIKURA 2024 VENTUS WOOD SHAFT
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
Please read this page here before ordering. Ordering times below are based on stock availability in our Malaysia Warehouse. Some products shipped from our other locations may require longer delivery times.
Within Malaysia
- Shipped by GD Express
- Delivered within 2-3 days
-
Semenanjung Malaysia
- Flat rate of USD$5 for grips and other small items
- Flat rate of USD$8 for shafts
- Sabah & Sarawak
- Flat rate of USD$10
- Shipped by UPS
- Next day delivery
- Flat rate of USD$20
- Delivered by FedEx, DHL or UPS
- Will be delivered under two weeks time
- Shipping fee for shafts is USD$39
- Shipping fee for grips is USD$20
To Singapore
Contact us for priority shipping
To the rest of the world (excluding USA, Australia and Thailand)
FUJIKURA 2024 VENTUS WOOD SHAFT
VENTUS BLUE
A mid-launch/low spin wood shaft that has been re-engineered with updated materials and technology for improved feel, consistency and speed for all golfers.
The evolution of one of the winningest and highest performance shafts in Fujikura history has arrived. The all-new 2024 VENTUS is enhanced with new VeloCore+ technology and advanced material designs to offer players even greater performance results than its predecessor.
"Featuring Velocore+ Technology"
VELOCORE+ is the next generation of Fujikura's ground-breaking proprietary technology. The technology is designed for ultimate clubhead stabilization and promotes consistent center-face contact, tightening dispersion and increasing control of the club throughout the swing. Featuring a re-engineered multi-material bias core, VELOCORE+ enhances the feel and performance of VENTUS with an additional premium bias core material, promoting even tighter dispersion and increased ball speeds.
SPECIFICATIONS
| Model | Flex | Length | Weight | Tip Flex | Butt Flex | Torque | Par. Tip Length | Butt Diameter | Bend Point | Spin | Launch |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Blue 5 | R2 | 46 | 58 | 110 | 110 | 3.9 | 3.0 | 0.608 | L/M | M | M/H |
| R | 46 | 58.5 | 102 | 100 | 3.7 | 3.0 | 0.608 | M | L | M | |
| S | 46 | 58.5 | 96 | 91 | 3.5 | 3.0 | 0.608 | M | L | M | |
| X | 46 | 59 | 92 | 85 | 3.3 | 3.0 | 0.608 | M | L | M | |
| Blue 6 | R | 46 | 65 | 100 | 92 | 3.4 | 3.0 | 0.606 | M | L | M |
| S | 46 | 65.5 | 95 | 86 | 3.3 | 3.0 | 0.606 | M | L | M | |
| X | 46 | 66 | 90 | 80 | 3.1 | 3.0 | 0.606 | M | L | M | |
| TX | 46 | 66.5 | 90 | 74 | 3.1 | 3.0 | 0.608 | M | L | M | |
| Blue 7 | S | 46 | 75.5 | 91 | 82 | 3.0 | 3.0 | 0.606 | M | L | M |
| X | 46 | 76 | 87 | 76 | 2.9 | 3.0 | 0.610 | M | L | M | |
| TX | 46 | 77 | 87 | 70 | 2.9 | 3.0 | 0.610 | M | L | M/L | |
| Blue 8 | S | 46 | 84.5 | 90 | 78 | 2.9 | 3.0 | 0.610 | M | L | M/L |
| X | 46 | 85 | 86 | 72 | 2.8 | 3.0 | 0.610 | M | L | M/L | |
| Blue 9 | X | 46 | 94 | 84 | 70 | 2.8 | 3.0 | 0.620 | M | L | M/L |
BEND PROFILE
| MODEL | TIP | MID | HANDLE |
|---|---|---|---|
| VENTUS WHITE | FIRM | MEDIUM | SOFT |
| VENTUS RED | STIFF | FIRM | ULTRA-STIFF |
| VENTUS BLUE | ULTRA-STIFF | STIFF | FIRM |
| VENTUS BLACK | ULTRA-STIFF | STIFF | ULTRA-STIFF |
SHAFT TIP TRIMMING
The following tip trimming instructions are suggestions only. We generally do not recommend tip trimming on a driver or 3 wood shafts based on the shaft composition and how tipping could affect performance. We recommend that you consult your custom fitter or club-builder for the best tip trimming suggestions based on your individual swing and desired results.
In general, tip trimming can be used to achieve a stiffer shaft profile, lower launch, and/or lower spin. Tip trimming 1“is equivalent to one flex. For example, if you wanted to stiffen your S flex to an X flex then you would tip trim 1”. If you prefer to play shaft in between S and X flex, you would tip trim 1/2”.
| Woods | 1 | 3 | 5 | 7 | 9 | ||||
| All Wood Shafts | 0” | 0” | 0.5” | 1.0” | 1.5” | ||||
| Hybrids | 15°-17° | 18°-20° | 21°-23° | 24°-27° | 28° | ||||
| All Hybrids | 0” | 0” | 0.5” | 1.0” | 1.5” | ||||
| VENTUS HB | .370 parallel can be tapered to be used in .355 tapered hybrid clubs or utilities and long irons. | ||||||||
| Irons | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | W |
| AXIOM | 0” | 0.5” | 1.0” | 0” | 0.5” | 1.0” | 0” | 0.5” | 1.0” |
| *Butt trim to desired length; can be tapered to fit .355 hosels | |||||||||
| Irons | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | W |
|
PRO/Vista Pro/Sakura |
0” | 0.5” | 1.0” | 1.5” | 2.0” | 2.5” | 3.0” | 3.5” | 4.0” |
|
PRO/Vista Pro/Sakura |
Butt trim to desired length* | ||||||||
| MCI | No tipping required; Butt trim to desired length* | ||||||||
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
